Mold Removal Process

Mold Removal Process

Mold | Spangler removal procedures start with a professional inspection. The inspection looks for the exact varieties and levels of mold in the home, uses moisture meters and determines whether or not homeowners should relocate.

To limit the spread of mold spores professionals use plastic to cover rooms and tape over heating or air conditioning vents. They also mist the affected area to suppress dust.


The first step in any mold removal process is a visual inspection. This helps the mold professional determine what the scope of the problem is and what materials need to be removed and cleaned.

This is also a good time to figure out how much of the contamination is in one area so the remediation can be performed according to the proper guidelines (Level 1 or Level 2 for smaller areas, etc.).

Once the contamination area is defined, the mold professionals will contain it using plastic sheeting to keep spores from spreading to other parts of the home or building. The mold experts will also use negative air machines with HEPA filters to control airborne spores and other impurities.

As a part of the containment process, mold spores will be removed from non-porous surfaces, such as drywall and insulation, by spraying and wiping with detergent solutions. Afterwards, the contaminated material will be removed and discarded.


Mold removal involves getting rid of the spores and cleaning the surface. Professionals typically seal off the area to prevent mold spores from spreading to other areas of the home. They also vacuum any non-porous materials that are affected by the mold, using a HEPA filtered machine and bagging the contents to prevent spores from escaping back into the air.

Porous materials such as drywall, carpets and insulation need to be removed and replaced when they are infested with mold. This is a time-consuming and expensive process.

To clean the affected area, you need to use a strong cleaner that is specifically made for mold removal. You can buy a commercial solution at any hardware store or make your own by mixing 3% hydrogen peroxide with water in a spray bottle. Apply the solution to the moldy surface and leave it for a couple of minutes to let it start working. Scrub the affected area with a brush or sponge, and then wipe it down with a damp towel.


A mold removal company will use powerful chemicals to disinfect the affected area. The process involves misting contaminated spots, using detergent solutions and scrubbing unmovable structure elements. All the wet and moldy materials are discarded in plastic bags to lower the risk of spores spreading through the air.

The contaminated spot is isolated from the rest of the room with polyurethane sheeting or duct tape, depending on the level of contamination. A professional will close doors and windows to prevent spores from migrating to other areas of the property.

If highly mold-damaged porous building materials like drywall or insulation need to be removed, they are packaged, sealed in plastic, and then sprayed down with an antimicrobial spray to kill any lingering spores. This is followed by an extensive drying process with large fans and dehumidifiers. During this time, the experts may use moisture meters to check whether the building is completely dry. They will also re-inspect the remediation work to make sure it has been done properly.


Remediation includes removing all moldy building materials and disinfecting surfaces to prevent future growth. This also involves removing and replacing any items that are beyond salvageability, such as drywall, carpet, insulation, etc. Remediation is typically done in a sealed room that has negative air pressure so spores are not carried outside the remediation area.

During the cleanup process, it is important to protect personal belongings. A contents pack out is usually performed near the beginning of the remediation process. The restoration company removes saveable contents like textiles, clothes, hard goods, photos and electronics and takes them off site to be restored.

The mold removal crew then encapsulates the area with a special solution that kills spores you cannot see and prevents them from coming back. Lastly, a post remediation inspection is conducted with moisture readings and visual cues to make sure the mold has been eliminated. Then, clearance testing confirms that the area is safe for reconstruction and occupancy.